These are the installation instructions as of 2017-07-11 for the alpha II state of the project (still version 0.0.1) see Help#Installation
These are the installation instructions as of 2017-07-11 for the alpha II state of the project (still version 0.0.1) see Help#Installation
To build can4eve you might want to run
git clone https://github.com/BITPlan/can4eve
cd can4eve/obdii
./rebuild
after a while you should see
[INFO] ------------------------------------------------------------------------
...
[INFO] com.bitplan.can4eve ................................ SUCCESS [ 1.510 s]
[INFO] com.bitplan.elm327 ................................. SUCCESS [ 3.983 s]
[INFO] com.bitplan.can4eve.can4eve ........................ SUCCESS [ 5.918 s]
[INFO] com.bitplan.obdii .................................. SUCCESS [ 8.667 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
...
To build can4eve you might want to run
git clone https://github.com/BITPlan/can4eve
cd can4eve/obdii
./rebuild
after a while you should see
[INFO] ------------------------------------------------------------------------
...
[INFO] com.bitplan.can4eve ................................ SUCCESS [ 1.510 s]
[INFO] com.bitplan.elm327 ................................. SUCCESS [ 3.983 s]
[INFO] com.bitplan.can4eve.can4eve ........................ SUCCESS [ 5.918 s]
[INFO] com.bitplan.obdii .................................. SUCCESS [ 8.667 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
...
These are the installation instructions as of 2017-06 for the alpha state of the project
git clone https://github.com/BITPlan/can4eve
cd can4eve
mvn install -D skipTests
with output:
...
INFO] Reactor Build Order:
[INFO]
[INFO] com.bitplan.can4eve
[INFO] com.bitplan.elm327
[INFO] com.bitplan.can4eve.can4eve
[INFO] com.bitplan.obdii
[INFO]
...
[INFO] Reactor Summary:
[INFO]
[INFO] com.bitplan.can4eve ................................ SUCCESS [ 0.496 s]
[INFO] com.bitplan.elm327 ................................. SUCCESS [ 2.037 s]
[INFO] com.bitplan.can4eve.can4eve ........................ SUCCESS [ 0.188 s]
[INFO] com.bitplan.obdii .................................. SUCCESS [ 4.129 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
cd /obdii/
./rebuild
with output:
...
[INFO] Building jar: ... /can4eve/obdii/target/com.bitplan.obdii-0.0.1-jar-with-dependencies.jar
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
mvn test
...
-------------------------------------------------------
T E S T S
-------------------------------------------------------
Running com.bitplan.obdii.TestELM327
CANTriplet: 0.0.1
Tests run: 16, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 33.321 sec
Running com.bitplan.obdii.TestVehicle
Tests run: 2, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.061 sec
Running com.bitplan.obdii.TestWikiInfo
Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.003 sec
Results :
Tests run: 19, Failures: 0, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ----------------------------------------------
java -jar target/com.bitplan.obdii-0.0.1-jar-with-dependencies.jar -h
Help
CANTriplet: 0.0.1
usage: java CANTriplet
--display [None | Console | Swing] : display
the display to use one of:
None,Console,Swing
--host (--hostname) WERT : host
the host to connect to
--limit (--framelimit) N : limit
the maximum number of frames to read
--port (--portnumber) N : port
the port to connect to
--vg (--vehicle-group) WERT : vehicleGroup
the vehicleGroup to connect to
-c (--conn) WERT : connection device
the connection to use
-d (--debug) : debug
create additional debug output if this
switch is used
-h (--help) : help
show this usage
-l (--log) WERT : log
the logfile to write
-p (--pid) WERT : pid to monitor
the pid to monitor
-t (--timeout) N : timeout in msecs
the timeout for elm327 communication
-v (--version) : showVersion
show current version if this switch is
used
This is the test script I am using on Mac OS computer from the command line to run the software:
#!/bin/bash
# 2017-04-02
dev=/dev/ttyUSB0
os=`uname`
case $os in
Darwin)
#dev=/dev/tty.usbserial-113010822821
dev=/dev/cu.usbserial-113010822821
;;
esac
#
# show usage
#
usage() {
echo "$0 [-d|-h]"
echo " -h|--help : show this usage"
echo " -d|--debug : switch on debugging"
#exit 1
}
# commandline option
option=$1
# optionally show usage
case $option in
-h|--help)
usage
options="--help"
;;
# switch on debugging
# see https://sdqweb.ipd.kit.edu/wiki/Remote_Debugging_mit_Eclipse
-d|--debug) options="--debug"
esac
soption="-F";
case $os in
Darwin) soption="-f";;
esac
#stty $soption $dev 115200
stty $soption $dev 230400&
#stty $soption $dev 460800&
java -jar target/com.bitplan.obdii-0.0.1-jar-with-dependencies.jar $options --conn $dev --display Swing --log Ion
You might want to modify:
According to your environment and device.
And you might want to make sure the log file directory exists