Difference between revisions of "Help"
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
= Configuring your OBD connection = | = Configuring your OBD connection = | ||
Select the menu Settings/OBDII | Select the menu Settings/OBDII | ||
| − | * Network connection: Select the deviceType Network, set the hostname | + | * Network connection: Select the deviceType Network, set the hostname and port |
* USB connection: Select the deviceType USB, select the serialDevice via the "..." button near the serialDevice, set the baudRate (only click direct if you are setting the baudrate via a different means e.g. stty) | * USB connection: Select the deviceType USB, select the serialDevice via the "..." button near the serialDevice, set the baudRate (only click direct if you are setting the baudrate via a different means e.g. stty) | ||
* Bluetooth connection: Not directly supported as of 2017-07 - you might want to e.g. use the forward scripts | * Bluetooth connection: Not directly supported as of 2017-07 - you might want to e.g. use the forward scripts | ||
Revision as of 19:55, 11 July 2017
Prerequisites
Installation
- Download the software for your platform from Downloads
Building can4eve yourself
To build can4eve you might want to run
git clone https://github.com/BITPlan/can4eve
cd can4eve/obdii
./rebuild
after a while you should see
[INFO] ------------------------------------------------------------------------
...
[INFO] com.bitplan.can4eve ................................ SUCCESS [ 1.510 s]
[INFO] com.bitplan.elm327 ................................. SUCCESS [ 3.983 s]
[INFO] com.bitplan.can4eve.can4eve ........................ SUCCESS [ 5.918 s]
[INFO] com.bitplan.obdii .................................. SUCCESS [ 8.667 s]
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
...
Starting
Run the software with java -jar can4eve.jar or can4eve (If you built the software yourself: cd can4eve/obdii/release before this command) The first screen should show one of the Panels shown below.
Configuring your OBD connection
Select the menu Settings/OBDII
- Network connection: Select the deviceType Network, set the hostname and port
- USB connection: Select the deviceType USB, select the serialDevice via the "..." button near the serialDevice, set the baudRate (only click direct if you are setting the baudrate via a different means e.g. stty)
- Bluetooth connection: Not directly supported as of 2017-07 - you might want to e.g. use the forward scripts
- Simulator connection: Select the deviceType simulator
Panels
Clocks
Odometer
SOC
RPM
