From BITPlan can4eve Wiki
Jump to: navigation, search

You might want to select the serial Connection parameters:


item hint
device the name of the device depends on your computer's operating system (see below)
baud rate the speed of the connection or automatic if typical baudrates shall be tried see
direct check if the access to the device should be done directly with out a serial driver. You might want to set the parameters of

the device manually then e.g. via an stty command



typical connection devices are:

  • COM1
  • COM2
  • COM3
  • ...


typical connection devices are

  • ttyUSB0
  • ttyUSB1
  • ...

Mac OS

typical connection devices are:

  • cu-usbserial
  • cu-usbserial-####